Home » Phones » Phone showing charging but battery percentage not increasing [Solution]

Phone showing charging but battery percentage not increasing [Solution]

Have you ever experienced a phone that wouldn’t charge?

Many users have experienced the issue when their phone’s battery level doesn’t rise even though the phone indicates that it is still charging. To put it mildly, this can be a very frustrating problem. But happily, there are a number of solutions.

Techpotamus will go over some of the most typical reasons for this issue in this blog post, along with solutions. We’ll also give you some valuable advice on how to maintain the battery life of your smartphone.

Ready to learn everything there is to know about charging your phone? Read on!

The Most Common Reasons A Phone Won’t Charge

Even though your phone says it is charging and you have plugged it into a power source, there are a number of reasons why the percentage of the battery might not be rising.

Some of the most typical causes are listed below:

Charging Port Full Of Dust Or Dirt

A dirty, dusty, or even covered in pocket lint charging port is one of the most typical reasons of this issue. The charging efficiency of your phone may suffer if the charging port is unclean (or even completely ineffective).

You must clean the port if you want your phone to function correctly. You can use a toothpick, a cotton swab coated in rubbing alcohol, or a can of compressed air to clean the charging port on your phone.

Check Phone For A Software Glitch

If the battery level on your phone isn’t rising, there can be software flaws.

You can try restarting it or performing a hard reset to remedy this. Simply hold down the power button until it turns off to restart your device. Holding down the same power button will then turn it back on.

Your phone’s make and model, such as whether it’s an iPhone or an Android phone, will determine how to hard reset it.

Restarting or resetting your phone should solve the problem if it’s just a minor software glitch.

Update Firmware Or Restore To Factory Settings

Unfortunately, you might need to update your firmware or reset your phone to factory settings if these steps don’t work. A DFU restore is what is done when you restore your mobile device.

Make a backup of your phone before doing this because there may be some data loss. If significant repairs are required for your phone, you might also wish to verify the warranty.

Call Apple Support, Samsung, or the manufacturer of your phone if you have any concerns about whether this is the best course of action for you. Ask them for guidance.

 The Battery Itself Is Low On Power

The battery itself may be running low on power, which is another potential explanation for why your phone’s battery percentage isn’t rising. This typically occurs when a battery needs to be replaced after being used extensively.

You will require a new battery if this is the case. You have two options for replacing the battery: either do it yourself or bring your phone to a repair shop and have them handle it.

The Cable May Be Faulty

If the battery isn’t the problem, then the charging cable can be. It may be difficult for the cable to adequately transfer power from the charger to your phone if it is old or broken. This is a frequent cause of billing issues.

You will need to purchase a new cable in this situation. Make sure the one you choose has positive reviews and is compatible with your phone.

The Charger May Be Faulty

If the battery and cable are both functioning properly, the issue might be with the charger. Even when it is inserted into the electric socket and into your phone, a charger that is outdated or incompatible with your phone may not be able to charge it effectively.

A new charger that works with your phone will be required. Before you purchase one, make sure to read the reviews to ensure that it is a high-quality item.

How To Keep Your Phone Battery Healthy

Let’s talk about how to maintain a healthy battery now that you know how to address the issue where your phone’s battery % does not increase despite being plugged in and the charge indicator indicating that it is charging. The last thing you want to happen is for the battery to degrade to the point where it can no longer be charged.

Use Original Chargers Only

Using only original chargers is one of the greatest ways to maintain the health of your battery. Many individuals believe that any charger would do, including a cheap model you can acquire from a third party on an online marketplace. This is not the case, though.

You can make sure your battery is receiving the right amount of power and isn’t being overcharged or undercharged by using an original charger. The availability of several charger types is due to the fact that each type of phone requires a specific setup. Make sure to purchase a charger designed specifically for your model of phone.

Avoid Extreme Temperatures

Extreme temperatures should also be avoided if you want to preserve your battery in good condition. This denotes both hot and cold conditions.

Your battery may be damaged and lose its charge more quickly if it is too hot or too cold. Keep your phone as much as you can in a temperature-controlled environment to prevent this.

 Use Low-Power Mode Or Power-Saving Mode When Possible

If you frequently use your phone, you might want to think about switching to low-power mode whenever you can. This will aid in power conservation and prevent your battery from depleting as soon as it would in standard mode.

However, if you don’t use your phone frequently, you might want to think about adopting power-saving mode. By doing this, you’ll be able to keep your battery charged until you need it.

Don’t Let Your Battery Drain Completely

Complete battery discharge is among the worst things you can do for your battery. The battery is put under a lot of strain as a result, which may accelerate battery deterioration.

This may come as a surprise to you. After all, we are accustomed to the bygone era of batteries, when it was essential to let them completely discharge before recharging.

With lithium-ion batteries, this isn’t the case anymore. These days, keeping your battery between 60% and 80% is actually preferable.

Try to charge your phone before it drops below 20% to prevent this. Additionally, try not to frequently run it at 100%. This is because the battery will discharge at extremely high percentages.

Charge Your Phone Slowly Whenever Possible

The temptation to charge your phone as quickly as you can so that you can resume using it might be strong. However, the battery will not benefit from this.

When feasible, it’s advisable to charge your phone slowly. This entails putting it to charge, for instance, using the USB port on your laptop or PC, where the process takes significantly longer. This will relieve some of the burden on your battery while it warms up and charges.

Avoid Using Your Phone While Charging It

And last but not least, using your phone while it’s charging is a smart thing to avoid if you want to maintain your phone battery healthy. While plugged in, using your phone increases the risk of the battery overheating and depleting more quickly.

Avoid doing anything that might put a lot of demand on the battery if you must use your phone while it is charging. Your battery is likely under considerable stress and requires some time to rest if you notice it overheating.


In conclusion, if your phone’s battery level isn’t rising despite being plugged in and charging, it can be very aggravating. Fortunately, there are a number of explanations that could be the case, and many of them are simple enough for you to attempt without a repair shop’s assistance. And now that you know how to repair your phone’s charging issues, you also know how to maintain a strong phone battery for many years to come.

You should have no trouble getting your phone battery to function properly if you keep these suggestions in mind!

Do you have any other advice for repairing an improperly charged phone battery? Please share them in the comments section below.


Your phone may not be charging properly for a variety of reasons. You can see that it might be anything from a bad power outlet to a damaged motherboard by consulting our guide.

This might be the result of you using your phone while it is charging or a problem with your charger. View our guide to learn how to handle these issues!

  • Switch off your laptop, iPad, and phone.
  • A tiny bit of cotton should be wrapped around the toothpick’s tip.
  • Short bursts of compressed air should be sprayed into the port.
  • Use the toothpick that has been cotton-wrapped to scrape the port’s inner edges.
  • Apply a little rubbing alcohol to the pad if necessary.
  • Switch off the device.
  • Short bursts of compressed air should be sprayed into the port.
  • Make use of a dental pick to clean the inner edges.
  • If there is goo or gunk, wrap a small amount of cotton around the dental pick’s tip.
  • By circling the port with a cotton end that has been dampened with isopropyl alcohol, the interior can be cleaned.

Leave a comment